D-Link DGS-3620-52T CLI Guide - Page 44
Format, Parameters, Restrictions
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config 802.1x auth_parameter ports [ | all] [default | {direction [both | in] | port_control [force_unauth | auto | force_auth] | quiet_period | tx_period | supp_timeout | server_timeout | max_req | reauth_period | max_users [ | no_limit] | enable_reauth [enable | disable]}(1)] Parameters - Specify a range of ports to be configured. all - Specify to configure all ports. default - Set all parameters to the default value. direction - (Optional) Set the direction of access control. both - For bidirectional access control. in - For ingress access control. port_control - (Optional) Force a specific port to be unconditionally authorized or unauthorized by setting the parameter of port_control to be force_authorized or force_unauthorized. Besides, the controlled port will reflect the outcome of authentication if port_control is auto. force_auth - The port transmits and receives normal traffic without 802.1X-based authentication of the client. auto - The port begins in the unauthorized state, and relays authentication messages between the client and the authentication server. force_unauth - The port will remain in the unauthorized state, ignoring all attempts by the client to authenticate. quiet_period - (Optional) The initialization value of the quietWhile timer. The default value is 60 s and can be any value from 0 to 65535. - The quiet period value must be between 0 an 65535 seconds. tx_period - (Optional) The initialization value of the txWhen timer. The default value is 30 s and can be any value from 1 to 65535. - The transmit period value must be between 1 an 65535 seconds. supp_timeout - (Optional) The initialization value of the aWhile timer when timing out the supplicant. Its default value is 30 s and can be any value from 1 to 65535. - The timeout value must be between 1 an 65535 seconds. server_timeout - (Optional) The initialization value of the aWhile timer when timing out the authentication server. Its default value is 30 and can be any value from 1 to 65535. - The server timeout value must be between 1 an 65535 seconds. max_req - (Optional) The maximum number of times that the authenitcation PAE state machine will retransmit an EAP Request packet to the supplicant. Its default value is 2 and can be any number from 1 to 10. - The maximum require number must be between 1 and 10. reauth_period - (Optional) It's a non-zero number of seconds, which is used to be the reauthentication timer. The default value is 3600. - The reauthentication period value must be between 1 an 65535 seconds. max_users - (Optional) Set the maximum number of users between 1 and 448. - The maximum users value must be between 1 and 448. no_limit - Set an unlimited number of users. enable_reauth - (Optional) Enable or disable the re-authentication mechanism for a specific port. enable - Enable the re-authentication mechanism for a specific port. disable - Disable the re-authentication mechanism for a specific port. Restrictions Only Administrator, Operator and Power-User level users can issue this command. 39