D-Link DGS-3620-52T CLI Guide - Page 810

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide candidate RP and the multicast group address, to calculate the hash algorithm used by the router to determine which CRP on the PIM-SM enabled network will be the RP. - Enter the hash mask lenght value here. This value must be between 0 and 32. The default value is 30 seconds. bootstrap_period - Specifies the interval between originating Bootstrap message. - Enter the bootstrap period value used here. This value must be between 1 and 255. The default value is 60 seconds. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the C-BSR for the System interface : DGS-3620-28SC:admin# config pim cbsr ipif System priority 255 Command: config pim cbsr ipif System priority 255 Success. DGS-3620-28SC:admin# 73-7 show pim cbsr Description This command is used to list the candidate bootstrap router related information. Format show pim cbsr {ipif } Parameters ipif - Specifies the IP interface used for this configuration. - Enter the IP interface name used here. This name can be up to 12 characters long. If no parameter is specified, the system will display all C-BSR configurations. Restrictions None. Example To display the C-BSR settings: DGS-3620-28SC:admin# show pim cbsr Command: show pim cbsr PIM Candidate-BSR Table 805