D-Link DGS-3620-52T CLI Guide - Page 473
config router_ports, config router_ports_forbidden
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 473 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 39-3 config router_ports Description This command is used to designate a range of ports as being connected to multicast-enabled routers. This will ensure that all packets with such a router as its destination will reach the multicast-enabled router, regardless of protocol. Format config router_ports [ | vlanid ] [add | delete] Parameters - Specify the name of the VLAN on which the router port resides. vlanid - Specify the VLAN ID list. - Specify the VLAN ID list. add - Specify to add the router ports. delete - Specify to delete the router ports. - Specify a range of ports to be configured. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To set up static router ports: DGS-3620-28SC:admin#config router_ports default add 1-10 Command: config router_ports default add 1-10 Success. DGS-3620-28SC:admin# 39-4 config router_ports_forbidden Description This command is used to designate a range of ports as being not connected to multicast-enabled routers. This ensures that the forbidden router port will not propagate routing packets out. Format config router_ports_forbidden [ | vlanid ] [add | delete] Parameters - Specify the name of the VLAN on which the router port resides. vlanid - Specify the VLAN ID list. - Specify the VLAN ID list. 468