D-Link DGS-3620-52T CLI Guide - Page 689

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions None. Example To display router ports: DGS-3620-28SC:admin#show mld_snooping mrouter_ports all Command: show mld_snooping mrouter_ports all VLAN Name Static Router Port Dynamic Router Port Router IP Forbidden Router Port : default : : : : Total Entries: 1 DGS-3620-28SC:admin# 61-18 show mld_snooping forwarding Description This command is used to display the switch's current MLD snooping forwarding table. It provides an easy way for users to check the list of ports that the multicast group comes from specific sources will be forwarded to. The packet comes from the source VLAN. They will be forwarded to the forwarding ports. Format show mld_snooping forwarding {[vlan | vlanid ]} Parameters vlan - (Optional) Specify the name of the VLAN for which to view MLD snooping forwarding table information. - Specify the VLAN name. The maximum length is 32 characters. vlanid - (Optional) Specify the ID of the VLAN for which to view MLD snooping forwarding table information. - Specify the VLAN ID list. Note: If no parameter is specified, the system will display all currently configured MLD snooping forwarding entries. Restrictions None. Example To display all MLD snooping forwarding entries located on the switch: 684