D-Link DGS-3620-52T CLI Guide - Page 186

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide - Enter the peer group name here. This name can be up to 16 characters long. external - All eBGP sessions will be reset. soft - (Optional) Initiates a soft reset. Does not tear down the session. in - Initiates inbound reconfiguration. If neither in nor out keywords are specified, both inbound and outbound sessions are reset. prefix_filter - The local site configured prefix filter will be notified to the remote neighbor when inbound soft reset is applied. out - Initiates outbound reconfiguration. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To reset all Border Gateway Protocol (BGP) connections: DGS-3620-28SC:admin# clear bgp all Command: clear bgp all Success. DGS-3620-28SC:admin# 12-35 clear bgp dampening Description This command clears the route dampening information stored in the routing table. If no parameters are specified, the dampening information for the entire routing table will be cleared. Format clear bgp dampening {[ | ]} Parameters - (Optional) Specifies an IPv4 address to clear the dampening information. - (Optional) Specifies an IPv4 network to clear the dampening information. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To clear route dampening information for network 192.168.10.0/24 and free suppressed routes: 181