D-Link DGS-3620-52T CLI Guide - Page 870

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide To configure the domain number of the PTP clock as 1 and assign a domain name of internal_domain for the unit 1, when the stacking mode is enabled. DGS-3620-28SC:admin#config ptp clock domain_number 1 unit 1 domain_name internal_domain Command: config ptp clock domain_number 1 unit 1 domain_name internal_domain Success. DGS-3620-28SC:admin# 79-6 config ptp boundary Description This command is used to configure the PTP boundary clock attributes and requires at least one parameter to execute. Format config ptp boundary {priority1 | priority2 }(1) Parameters priority1 - (Optional) Specifies that the priority 1 attribute is used in the execution of the best master clock algorithm. Lower values take precedence. - Enter the priority 1 value used here. This value must be between 0 and 255. priority2 - (Optional) Specifies that the priority 2 attribute is used in the execution of the best master clock algorithm. Lower values take precedence. In the event that the operation of the BMC algorithm fails to order the clocks based on the values of priority1, the clock's class, and the clock's accuracy; the priority2 attribute will allow the creation of lower values compared to the other devices. - Enter the priority 2 value used here. This value must be between 0 and 255. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the priority1 value of the boundary clock as 127: DGS-3620-28SC:admin# config ptp boundary priority1 127 Command: config ptp boundary priority1 127 Success. DGS-3620-28SC:admin# 865