D-Link DGS-3620-52T CLI Guide - Page 912
create vlan_translation ports
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 912 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Role: NNI Miss Drop: Disabled Outer Tpid: 0x8100 Use Inner Priority: Disabled Add Inner Tag: Disabled DGS-3620-28SC:admin# 82-8 create vlan_translation ports Description This command is used to create translation relationships between C-VLAN and S-VLAN. This setting will not be effective when the Q-in-Q mode is disabled. This configuration is only effective for a UNI port. At the UNI port, the ingress C-VLAN tagged packets will be translated to S-VLAN tagged packets by adding or replacing according the configured rule. The S-VLAN Tag of egress packets at this port will be recovered to C-VLAN Tag or stripped. Format create vlan_translation ports [ | all] [add cvid | replace cvid ] svid {priority } Parameters - Specify a range of ports on which the C-VLAN will be translated to S-VLAN. all - Specify to configure all ports. add cvid - Specify to add a S-tag before C-tag for incoming packets with a specific CVID. - Specify the CVID (or list) to be matched for incoming packets. replace cvid - Specify to replace the original C-tag to a new S-tag for incoming packets with a specific CVID. - Specify the CVID to be matched for incoming packets. svid - Specify the SVID of the S-tag to be added or replaced to the packets. - Specify the SVID between 1 and 4094. priority - (Optional) Specify a 802.1p priority of the S-Tag between 0 and 7. If the priority is NOT specified, 802.1p priority of S-Tag will be assigned by the priority in C-tag. - Specify a 802.1p priority of the S-Tag between 0 and 7. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To replace the C-tag by the S-tag with SVID 200 and priority in C-tag, if the incoming packet with CVID 20: DGS-3620-28SC:admin#create vlan_translation ports 1 replace cvid 20 svid 200 Command: create vlan_translation ports 1 replace cvid 20 svid 200 Success. 907