D-Link DGS-3620-52T CLI Guide - Page 1015
config super_vlan
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1015 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To create super VLAN 10: DGS-3620-28SC:admin# create super_vlan vlanid 10 Command: create super_vlan vlanid 10 Success. DGS-3620-28SC:admin# 97-2 config super_vlan Description This command is used to configure the sub-VLANs of a super VLAN. A sub-VLAN only can belong to one super VLAN and you cannot bind an IP interface on it. The maximum sub-VLAN number of a super VLAN is 80. Format config super_vlan [ | vlanid ] [add | delete] sub_vlan Parameters - Enter the VLAN name used here. This name can be up to 32 characters long. vlanid - Specifies the VLAN ID used. - Enter the VLAN ID used here. This value must be between 1 and 4094. add - Specifies the sub-VLAN ID list to add to the super VLAN. The sub-VLAN shall be an existent 802.1Q VLAN. delete - Specifies the sub-VLAN ID list to delete from the super VLAN. sub_vlan - Specifies the sub-VLANs of the super VLAN. By default, a new created super VLAN has no sub-VLANs configured. - Enter the VLAN ID of the sub-VLAN used here. This value must be between 1 and 4094. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To add sub VLAN 2-4 into super VLAN 10: DGS-3620-28SC:admin# config super_vlan 10 add sub_vlan 2-4 Command: config super_vlan 10 add sub_vlan 2-4 Success. DGS-3620-28SC:admin# 1010