D-Link DGS-3620-52T CLI Guide - Page 178
config bgp neighbor map
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide When the router is in reflection mode, the router will exchange information with client neighbors in the reflection way and with the remaining neighbor in the ordinary way. When the router is in non-reflection mode, the router will exchange information with all the neighbors in the non-reflection way. An AS can have multiple clusters, and a cluster can have more than one reflector for redundancy purposes. Format config bgp neighbor route_reflector_client [ | peer_group ] state [enable | disable] Parameters - Specifies the IP address of the neighbor to be configured. peer_group - Specifies the peer group to be configured. - Enter the peer group name here. This name can be up to 16 characters long. state - The specified neighbor will become the router reflector client. By default, this state is disabled. enable - Specifies that the neighbor will become the router reflector client. disable - Specifies that the neighbor will not become the router reflector client. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example This example shows how to add a neighbor as the route reflector client: DGS-3620-28SC:admin# config bgp neighbor route_reflector_client 10.10.10.2 state enable Command: config bgp neighbor route_reflector_client 10.10.10.2 state enable Success. DGS-3620-28SC:admin# 12-27 config bgp neighbor map Description The command is used to configure the route map related setting for a BGP neighbor. When a route map is applied by the route_map command, it enforces the route policy. When it is applied by the unsuppress_map command, the suppressed route which matches the permit rule will be unsuppressed. It provides a manipulation of routers per neighbor. If a route map is configured relating to a BGP neighbor but the route map doesn't exist, it means deny any. If the route map exists but has no filter entry defined, it will permit all. 173