D-Link DGS-3620-52T CLI Guide - Page 1066

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters vrid - (Optional) Specifies the Virtual Router ID used. - Enter the Virtual Router ID used here. This value must be between 1 and 255. ipif - (Optional) Specifies the IP interface name used. - Enter the IP interface name used here. This name can be up to 12 characters long. If no parameter is specified, all the VRRP entries will be deleted. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete VRRP: DGS-3620-28SC:admin# delete vrrp vrid 3 ipif System Command: delete vrrp vrid 3 ipif System Success. DGS-3620-28SC:admin# 104-7 show vrrp Description This command is used to display the VRRP settings. Format show vrrp {ipif {vrid }} Parameters ipif - (Optional) Specifies the IP interface name to be displayed. - Enter the IP interface name to be displayed here. This name can be up to 12 characters long. vrid - (Optional) Specifies the Virtual Router ID to be displayed. - Enter the Virtual Router ID to be displayed here. This value must be between 1 and 255. If no parameter is specified, then all the VRRP entries will be displayed. Restrictions None. Example To display the VRRP configuration: 1061