D-Link DGS-3620-52T CLI Guide - Page 1058
enable broadcast_ping_reply
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1058 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format telnet [ | | ] {tcp_port } Parameters - Specify the IP address of the Telnet server. - Specify the domain name of the telnet server. - Specify the IPv6 address of the Telnet server. tcp_port - (Optional) Specify the Telnet server port number to be connected to. If not specified, the default port is 23. - Enter a value between 1 and 65535. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To Telnet to a switch by specifying the IP address: DGS-3620-28SC:admin#telnet 10.1.1.1 Command: telnet 10.1.1.1 DGS-3620-28SC Gigabit Ethernet Switch Command Line Interface Firmware: Build 2.00.015 Copyright(C) 2012 D-Link Corporation. All rights reserved. UserName: 103-21 enable broadcast_ping_reply Description The enable broadcast_ping_reply command used to enable broadcast ping reply state, device will reply broadcast ping request. Format enable broadcast_ping_reply Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. 1053