D-Link DGS-3620-52T CLI Guide - Page 1090

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters None. Restrictions None. Example To display the GVRP status of the switch: DGS-3620-28SC:admin#show gvrp Command: show gvrp Global GVRP : Disabled Join Time : 200 Milliseconds Leave Time : 600 Milliseconds LeaveAll Time : 10000 Milliseconds NNI BPDU Address: dot1d DGS-3620-28SC:admin# 106-16 config private_vlan Description A private VLAN is comprised of a primary VLAN, up to one isolated VLAN, and a number of community VLANs. A private VLAN ID is presented by the VLAN ID of the primary VLAN. The command used to associate or de-associate a secondary VLAN with a primary VLAN. A primary VLAN is created via the command create vlan type private_vlan. A secondary VLAN is created via the command create vlan type 1q_vlan. A secondary VLAN cannot be associated with multiple primary VLANs. The untagged member port of the primary VLAN is named as the promiscuous port. The tagged member port of the primary VLAN is named as the trunk port. A promiscuous port of a private VLAN cannot be promiscuous port of other private VLANs. The primary VLAN member port cannot be a secondary VLAN member at the same time, or vice versa. A secondary VLAN can only have the untagged member port. The member port of a secondary VLAN cannot be member port of other secondary VLAN at the same time. When a VLAN is associated with a primary VLAN as the secondary VLAN, the promiscuous port of the primary VLAN will behave as the untagged member of the secondary VLAN, and the trunk port of the primary VLAN will behave as the tagged member of the secondary VLAN. A secondary VLAN cannot be specified with advertisement. Only the primary VLAN can be configured as a layer 3 interface. The private VLAN member port cannot be configured with the traffic segmentation function. Format config private_vlan [ | vid ] [add [isolated | community] | remove] [ | vlanid ] 1085