D-Link DGS-3620-52T CLI Guide - Page 592
Limited Multicast IP, Address Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 592 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 51 Limited Multicast IP Address Commands create mcast_filter_profile {[ipv4 | ipv6]} profile_id profile_name config mcast_filter_profile [profile_id | profile_name ] {profile_name | [add | delete] }(1) config mcast_filter_profile ipv6 [profile_id | profile_name ] {profile_name | [add | delete] }(1) delete mcast_filter_profile {[ipv4 | ipv6]} [profile_id [ | all] | profile_name ] show mcast_filter_profile {[ipv4 | ipv6]} {[profile_id | profile_name ]} config limited_multicast_addr [ports | vlanid ] {[ipv4 | ipv6]} {[add | delete] [profile_id | profile_name ] | access [permit | deny]}(1) show limited_multicast_addr [ ports | vlanid ] {[ipv4 | ipv6]} config max_mcast_group [ports | vlanid ] {[ipv4 | ipv6]} {max_group [ | infinite] | action [drop | replace]} (1) show max_mcast_group [ports | vlanid ] {[ipv4 | ipv6]} 51-1 create mcast_filter_profile Description This command is used to create a multicast address profile. If the IPv4 or IPv6 option is not specified, IPv4 is implied. Format create mcast_filter_profile {[ipv4 | ipv6]} profile_id profile_name Parameters ipv4 - (Optional) Specifies to add an IPv4 multicast profile. ipv6 - (Optional) Specifies to add an IPv6 multicast profile. profile_id - Specifies the ID of the profile. - The profile ID range must be from 1 to 60 profile_name - Provides a meaningful description for the profile. - The profile name can be up to 32 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create a multicast address profile named MOD: DGS-3620-28SC:admin#create mcast_filter_profile profile_id 2 profile_name MOD Command: create mcast_filter_profile profile_id 2 profile_name MOD Success. 587