D-Link DGS-3620-52T CLI Guide - Page 1002
Static MAC-based, VLAN Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1002 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 94 Static MAC-based VLAN Commands create mac_based_vlan mac_address [vlan | vlanid ] {priority } delete mac_based_vlan {mac_address [vlan | vlanid ]} show mac_based_vlan {mac_address | [vlan | vlanid ]} 94-1 create mac_based_vlan mac_address Description This command is used to create static MAC-based VLAN entries. Format create mac_based_vlan mac_address [vlan | vlanid ] {priority } Parameters - Specify the MAC address. vlan - Specify the VLAN to be associated with the MAC address. The name must be an existing static VLAN name. - Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the VLAN ID to be associated with the MAC address. The ID must be an existing static VLAN ID. - Specify the VLAN ID between 1 and 4094. priority - (Optional) Specifies the priority that is assigned to untagged packets. If not specified, the priority is the default value 0. - Enter the priority value used here. This value must be between 0 and 7. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create a static MAC-based VLAN entry: DGS-3620-28SC:admin#create mac_based_vlan mac_address 00-00-00-00-00-01 vlan default Command: create mac_based_vlan mac_address 00-00-00-00-00-01 vlan default Success. DGS-3620-28SC:admin# 997