D-Link DGS-3620-52T CLI Guide - Page 700

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide If no parameter is specified, the system will display all multicast VLANs on the switch. Restrictions None. Example To display all MLD snooping multicast VLANs: DGS-3620-28SC:admin#show mld_snooping multicast_vlan Command: show mld_snooping multicast_vlan MLD Multicast VLAN Global State : Disabled MLD Multicast VLAN Forward Unmatched : Disabled VLAN Name VID :test :100 Member(Untagged) Ports Tagged Member Ports Source Ports Untagged Source Ports Status Replace Source IP Remap Priority :1 : :3 : :Disabled ::: :None Total Entries: 1 DGS-3620-28SC:admin# 62-13 config mld_snooping multicast_vlan forward_unmatched Description This command is used to configure the forwarding mode for MLD snooping multicast VLAN unmatched packets. When the switch receives an MLD snooping packet, it will match the packet against the multicast profile to determine which multicast VLAN to associate with. If the packet does not match all profiles, the packet will be forwarded in the natural VLAN of the packet, or dropped based on this setting. By default, the packet will be dropped. Format config mld_snooping multicast_vlan forward_unmatched [disable | enable] Parameters enable - The packet will be flooded on the VLAN. disable - The packet will be dropped. 695