D-Link DGS-3620-52T CLI Guide - Page 890
QoS Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 890 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 81 QoS Commands config bandwidth_control [ | all] {rx_rate [no_limit | ] | tx_rate [no_limit | ]}(1) show bandwidth_control {} config per_queue bandwidth_control {ports [ | all]} {{min_rate [no_limit | ]} max_rate [no_limit | ]}(1) show per_queue bandwidth_control {} config scheduling {ports [ | all]} [strict | weight ] config scheduling_mechanism {ports [ | all]} [strict | wrr] show scheduling {} show scheduling_mechanism {} config 802.1p user_priority {ports [ | all]} show 802.1p user_priority {} config 802.1p default_priority [ | all] show 802.1p default_priority {} enable hol_prevention disable hol_prevention show hol_prevention config dscp trust [|all] state [enable | disable] show dscp trust {} config dscp map [ | all] [ dscp_priority to | dscp_dscp to ] show dscp map { } [dscp_priority | dscp_dscp] {dscp } 81-1 config bandwidth_control Description This command is used to set the maximum limit for port bandwidth. Format config bandwidth_control [ | all] {rx_rate [no_limit | ] | tx_rate [no_limit | ]}(1) Parameters - Specify a range of ports to be configured. all - Specify all ports. rx_rate - (Optional) Specify the limitation of receive data rate. no_limit - Specify to indicate there is no limit on port rx bandwidth. - Specify an integer value from 64 to 10240000 to set a maximum limit in Kbits/sec. The specified bandwidth limit may be equaled but not exceeded. This exact logical limit or token value is hardware determined. Note: 1 Kbit = 1000 bits, 1 Gigabit = 1000*1000 Kbits. Actual rate = (inputted rate/ 64) * 64. tx_rate - (Optional) Specify the limitation of transmit data rate. no_limit - Specify to indicate there is no limit on port tx bandwidth. - Specify an integer value from 64 to 10240000 to set a maximum limit in Kbits/sec. The specified bandwidth limit may be equaled but not exceeded. This exact logical limit or token value is hardware determined. Actual rate = (inputted rate/ 64) * 64. 885