D-Link DGS-3620-52T CLI Guide - Page 458
show igmp
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 458 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide - Enter the last member query interval value here. This value must be between 1 and 25. The default value is 1. state - (Optional) Specifies the IGMP state on a router interface. enable - Specifies that the IGMP state will be enabled. disable - Specifies that the IGMP state will be disabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable IGMP version 1 for the IP interface "System": DGS-3620-28SC:admin# config igmp ipif System version 1 state enable Command: config igmp ipif System version 1 state enable Success. DGS-3620-28SC:admin# To configure IGMPv2 for all IP interfaces: DGS-3620-28SC:admin# config igmp all version 2 Command: config igmp all version 2 Success. DGS-3620-28SC:admin# 37-2 show igmp Description This command is used to display the IGMP configuration. Format show igmp {ipif } Parameters ipif - (Optional) Specifies the IP interface name used for this configuration. - Enter the IP interface name used for this configuration here. This name can be up to 12 characters long. all - Specifies that all the IP interfaces will be used. If no parameter is specified, the system will display all IGMP configurations. Restrictions None. 453