D-Link DGS-3620-52T CLI Guide - Page 905
show dscp map
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 905 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions Only Administrator, Operator level users can issue this command. Example In the case of a product supporting per-port DSCP mapping configuration, to configure the mapping of DSCP priority 1 to priority 1: DGS-3620-28SC:admin#config dscp map 1:1-1:8 dscp_priority 1 to priority 1 Command: config dscp map 1:1-1:8 dscp_priority 1 to priority 1 Success. DGS-3620-28SC:admin# In the case of a product supporting global DSCP mapping configuration, to configure the global mapping of DSCP priority 1 to priority 1: DGS-3620-28SC:admin#config dscp map dscp_priority 1 to priority 1 Command: config dscp map dscp_priority 1 to priority 1 Success. DGS-3620-28SC:admin# 81-19 show dscp map Description This command is used to display the DSCP map configuration parameters. Format show dscp map { } [dscp_priority | dscp_dscp] {dscp } Parameters - The range of ports to display. If no parameter is specified, the DSCP mapping for all ports will be displayed. If the project only support global configuration, the global information will be displayed. dscp_priority - Specifies the list of DSCP values to be mapped to a specific priority. dscp_dscp - Specifies the list of DSCP values to be mapped to a specific DSCP. dscp - This specifies the DSCP value that will be mapped. - Enter the dscp list number here. Restrictions Only Administrator and Operator level users can issue this command. 900