D-Link DGS-3620-52T CLI Guide - Page 107
config flow_meter
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To disable CPU interface filtering: DGS-3620-28SC:admin#disable cpu_interface_filtering Command: disable cpu_interface_filtering Success. DGS-3620-28SC:admin# 5-14 config flow_meter Description This command is used to configure the flow-based metering function. The metering function supports three modes: single rate two color, single rate three color, and two rate three color. The access rule must be created before the parameters of this function can be applied. For the single rate two color mode, users may set the preferred bandwidth for this rule, in Kbps, and once the bandwidth has been exceeded, overflowing packets will either be dropped or remarked DSCP, depending on the user configuration. For single rate three color mode, users need to specify the committed rate, in Kbps, the committed burst size, and the excess burst size. For the two rate three color mode, users need to specify the committed rate in Kbps, the committed burst size, the peak rate and the peak burst size. The green color packet will be treated as the conforming action, the yellow color packet will be treated as the exceeding action, and the red color packet will be treated as the violating action. The replace DSCP action can be performed on packets that conform (GREEN) and packets that do not conform (YELLOW and RED). If drop YELLOW/RED is selected, the action to replace the DSCP will not take effect. The color mapping for both "single rate three color" and "two rate three color" mode follow RFC 2697 and RFC 2698 in the color-blind situation. Format config flow_meter [profile_id | profile_name ] access_id [rate [] {burst_size []} rate_exceed [drop_packet | remark_dscp ] | tr_tcm cir {cbs } pir {pbs } {[color_blind | color_aware]} {conform [permit | replace_dscp ] {counter [enable | disable]}} exceed [permit {replace_dscp } | drop] {counter [enable | disable]} violate [permit {replace_dscp } | drop] {counter [enable | disable]} | sr_tcm cir cbs ebs {[color_blind | color_aware]} {conform [permit | replace_dscp ] {counter [enable | disable]}} exceed [permit {replace_dscp } | drop] {counter [enable | disable]} violate [permit {replace_dscp } | drop] {counter [enable | disable]} | delete] Parameters profile_id - Specify the index of the access list profile. - Specify the value between 1 and 6. profile_name - Specify the name of the profile. - Specify the name of the profile. The maximum length is 32 characters. access_id - Specify the index of the access list entry. - Specify the value between 1 and 256. 102