D-Link DGS-3620-52T CLI Guide - Page 570
config jwac radius_protocol
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 570 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide block_time - If a host fails to pass the authentication, it will be blocked for a period specified by the blocking time.The default value is 60 seconds. - Specify a blocking time value between 0 and 300. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the JWAC port state: DGS-3620-28SC:admin#config jwac ports 1-9 state enable Command: config jwac ports 1-9 state enable Success. DGS-3620-28SC:admin# 47-18 config jwac radius_protocol Description This command is used to specify the RADIUS protocol used by JWAC to complete RADIUS authentication. Format config jwac radius_protocol [local | eap_md5 | pap | chap | ms_chap | ms_chapv2] Parameters local - Specify the JWAC switch uses the local user DB to complete the authentication. eap_md5 - Specify the JWAC switch uses EAP MD5 to communicate with the RADIUS server. pap - Specify the JWAC switch uses PAP to communicate with the RADIUS server. chap - Specify the JWAC switch uses CHAP to communicate with the RADIUS server. ms_chap - Specify the JWAC switch uses MS-CHAP to communicate with the RADIUS server. ms_chapv2 - Specify the JWAC switch uses MS-CHAPv2 to communicate with the RADIUS server. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the RADIUS protocol used by JWAC: DGS-3620-28SC:admin# config jwac radius_protocol ms_chapv2 Command: config jwac radius_protocol ms_chapv2 Success. 565