D-Link DGS-3620-52T CLI Guide - Page 909
config qinq ports
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 909 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To display Q-in-Q: DGS-3620-28SC:admin#show qinq Command: show qinq QinQ Status : Enabled DGS-3620-28SC:admin# 82-4 config qinq ports Description This command is used to configure Q-in-Q port parameters on this Switch. Format config qinq ports [ | all] {role [uni | nni] | missdrop [enable | disable] | outer_tpid | use_inner_priority [enable | disable] | add_inner_tag [ | disable]}(1) Parameters - Specify a range of ports to configure. all - Specify to configure all ports. role - Specify the port role in Q-in-Q mode. uni - The port is connecting to the customer network. nni - The port is connecting to the service provider network. missdrop - Enable or disable the tagged packet drop that does not match any assignment rule in the Q-in-Q profile. enable - Enable miss drop of ports. disable - Disable miss drop of ports. outer_tpid - Specify the outer-TPID of a port. - Specify the outer-TPID of a port. use_inner_priority - Specify whether to use the priority in the C-VLAN tag as the priority in the S-VLAN tag. By default, the setting is disabled. enable - Specifies that the use of the inner priority will be enabled. disable - Specifies that the use of the inner priority will be disabled. add_inner_tag - Specify whether to add inner tag for ingress untagged packets. If set, the inner tag will be added for the ingress untagged packets and, therefore, the packets that egress to the NNI port will be double tagged. - Enter the inner tag value here. disable - Specifies that only the s-tag will be added for ingress untagged packets. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure ports 1 to 4 as NNI ports and set the TPID to 0x88A8: DGS-3620-28SC:admin#config qinq ports 1-4 role nni outer_tpid 0x88a8 Command: config qinq ports 1-4 role nni outer_tpid 0x88a8 904