D-Link DGS-3620-52T CLI Guide - Page 652

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan default Success. DGS-3620-28SC:admin# 57-12 config mac_based_access_control max_users Description This command is used to configure the MAC-based access control maximum number of authorized users. Format config mac_based_access_control max_users [ | no_limit] Parameters - Specify the maximum number of authorized users. no_limit - Specify an unlimited number of authorized users. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the MAC-based access control maximum number of authorized users: DGS-3620-28SC:admin#config mac_based_access_control max_users 2 Command: config mac_based_access_control max_users 2 Success. DGS-3620-28SC:admin# 57-13 config mac_based_access_control authorization attributes Description This command is used to enable or disable the acceptance of an authorized configuration. When authorization is enabled for MAC-based access controls with RADIUS authentication, the authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server will be accepted if the global authorization status is enabled. When authorization is enabled for MAC-based access controls with local authentication, the authorized attributes assigned by the local database will be accepted. Format config mac_based_access_control authorization attributes {radius [enable | disable] | local [enable | disable]}(1) 647