D-Link DGS-3620-52T CLI Guide - Page 76
Example, Description, Format, Parameters
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To display all authentication server groups: DGS-3620-28SC:admin#show authen server_group Command: show authen server_group Group Name mix_1 radius tacacs tacacs+ xtacacs IP Address 10.1.1.222 10.1.1.224 10.1.1.225 10.1.1.226 10.1.1.227 Protocol -------TACACS+ RADIUS TACACS TACACS+ XTACACS Total Entries : 5 DGS-3620-28SC:admin# 4-18 create authen server_host Description This command is used to create an authentication server host. When an authentication server host is created, the IP address and protocol are the index. That means more than one authentication protocol service can be run on the same physical host. The maximum supported number of server hosts is 16. Format create authen server_host protocol [tacacs | xtacacs | tacacs+ | radius] {port | key [ | none] | timeout | retransmit } Parameters - Specify the server host's IP address. protocol - Specify the server host's type of authentication protocol. tacacs - Specify the server host's authentication protocol TACACS. xtacacs - Specify the server host's authentication protocol XTACACS. tacacs+ - Specify the server host's authentication protocol TACACS+. radius - Specify the server host's authentication protocol RADIUS. port - (Optional) Specify the port number of the authentication protocol for the server host. The default value for TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is 1812. - Specify the port number of the authentication protocol for the server host. The default value for TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is 1812. The port number must be between 1 and 65535. key - (Optional) Specify the key for TACACS+ and RADIUS authentication. - Specify the key for TACACS+ and RADIUS authenticaiton. If the value is null, no encryption will apply. This value is meaningless for TACACS and XTACACS. none - No encryption for TACACS+ and RADIUS authenticaiton. This value is meaningless for TACACS and XTACACS. timeout - (Optional) Specify the time in seconds for waiting for a server reply. The default value is 5 seconds. - Specify the time in seconds for waiting for a server reply. The default value is 5 seconds. The timeout value must be between 1 and 255 seconds. 71