D-Link DGS-3620-52T CLI Guide - Page 859

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 77 Power over Ethernet (PoE) Commands config poe ports [all | ] {state [enable | disable] | [time_range | clear_time_range] | priority [critical | high | low] | power_limit [class_0 | class_1 | class_2 | class_3 | user_define ]} config poe system {units [ | all]} {power_limit | power_disconnect_method [deny_next_port | deny_low_priority_port] | legacy_pd [enable | disable]} show poe ports {} show poe system {units } 77-1 config poe ports Description This command is used to configure the PoE port settings. Note: This command is only available to Switches in the DGS-3620 Series that support Power over Ethernet. Format config poe ports [all | ] {state [enable | disable] | [time_range | clear_time_range] | priority [critical | high | low] | power_limit [class_0 | class_1 | class_2 | class_3 | user_define ]} Parameters ports - Specifies the list of port used for this configuration. all - Specifies that all the ports will be used for this configuration. - Enter the list of ports, used for this configuration, here. state - (Optional) Specifies whether power will be supplied to the powered device connected to this port or not. enable - Specifies that PoE will be enabled of the specifies port(s). disable - Specifies that PoE will be disabled of the specifies port(s). time_range - (Optional) Specifies the time range that applies to the port of the PoE. If the time range is configured, the power can only be supplied during the period specified by the time range. - Enter the the time range name used here. This name can be up to 32 characters long. clear_time_range - Specifies that the time range will be removed. priority - (Optional) Port priority determines the priority the system attempts to supply the power to the port. There are three levels of priority that can be selected, critical, high, and low. When multiple ports happen to have the same level of priority, the port ID will be used to determine the priority. The lower port ID has higher priority. The setting of priority will affect the ordering of supplying power. Whether the disconnect method is set to deny low priority port, priority of port will be used by the system to manage the power supply to the ports. critical - Specifies that the priority value will be set to critical. high - Specifies that the priority value will be set to high. low - Specifies that the priority value will be set to low. 854