D-Link DGS-3620-52T CLI Guide - Page 383
config dhcpv6 pool domain_name
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 383 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config dhcpv6 pool ipv6network_addr begin end Parameters - Enter the DHCPv6 pool name used here. This name can be up to 12 characters long. begin - Specifies the beginning IPv6 network address of the DHCPv6 pool. - Enter the beginning IPv6 network address of the DHCPv6 pool here. end - Specifies the ending IPv6 network address of the DHCPv6 pool. - Enter the ending IPv6 network address of the DHCPv6 pool here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the range of ipv6network address for the DHCPv6 pool pool1: DGS-3620-28SC:admin# config dhcpv6 pool ipv6network_addr pool1 begin 2000::1/64 end 2000::32/64 Command: config dhcpv6 pool ipv6network_addr pool1 begin 2000::1/64 end 2000::32/64 success DGS-3620-28SC:admin# 25-5 config dhcpv6 pool domain_name Description This command is used to configure the domain name for the DHCPv6 pool of the Switch. The domain name configured here will be used as the default domain name by the client. By default, the domain name is empty. If domain name is empty, the domain name information will not be provided to the client. Format config dhcpv6 pool domain_name Parameters - Enter the DHCPv6 pool name used here. This name can be up to 12 characters long. - Enter the domain name used here. This name can be up to 255 characters long. 378