D-Link DGS-3620-52T CLI Guide - Page 598
config max_mcast_group
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 598 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# To display the limited multicast address range on ports 1 and 3: DGS-3620-28SC:admin#show limited_multicast_addr ports 1,3 Command: show limited_multicast_addr ports 1,3 Port : 1 Access : Deny Profile ID ----------1 Name ----------customer Multicast Addresses 224.19.62.34 - 224.19.162.200 Port : 3 Access : Deny Profile ID ----------1 Name customer Multicast Addresses 224.19.62.34 - 224.19.162.200 DGS-3620-28SC:admin# 51-8 config max_mcast_group Description This command is used to configure the maximum number of multicast groups a port or VLAN can join. If the IPv4 or IPv6 option is not specified, IPv4 is implied. When the joined groups for a port or a VLAN have reached the maximum number, the newly learned group will be dropped if the action is specified as drop. The newly learned group will replace the oldest group if the action is specified as replace. Format config max_mcast_group [ports | vlanid ] {[ipv4 | ipv6]} {max_group [ | infinite] | action [drop | replace]} (1) Parameters ports - Specify a range of ports to configure the maximum multicast group. - Specify a range of ports to be configured. vlanid - Specify the VLAN ID to configure the maximum multicast group. - Enter the VLAN ID of the VLAN here. ipv4 - (Optional) Specify that the maximum number of IPv4 learned addresses should be limited. ipv6 - (Optional) Specify that the maximum number of IPv6 learned addresses should be limited. max_group - (Optional) Specify the maximum number of the multicast groups. - The range is from 1 to 1024 or infinite. infinite - Infinite is the default setting. action - (Optional) Specify the action for handling newly learned groups when the register is full. 593