D-Link DGS-3620-52T CLI Guide - Page 46
config 802.1x max_users
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config 802.1x init [port_based ports [ | all] | mac_based ports [ | all] {mac_address }] Parameters port_based ports - Used to configure authentication in port-based mode. - Specify a range of ports to be configured. all - Specify to configure all ports. mac_based ports - To configure authentication in host-based 802.1X mode. - Specify a range of ports to be configured. all - Specify to configure all ports. mac_address - (Optional) Specify the MAC address of the host. - Enter the MAC address here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To initialize the authentication state machine of some or all: DGS-3620-28SC:admin# config 802.1x init port_based ports all Command: config 802.1x init port_based ports all Success. DGS-3620-28SC:admin# 3-14 config 802.1x max_users Description This command is used to configure the 802.1X maximum number of users of the system. Format config 802.1x max_users [ | no_limit] Parameters - Specify the maximum number of users. no_limit - Specify an unlimited number of users. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the 820.1X maximum numbers of the system: 41