D-Link DGS-3620-52T CLI Guide - Page 1046

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide rcp: - Specify the path on the RCP server or local RCP client. Note: If a user specifies the relative file path, the path search strategy will depend on the server system. For some systems, the current user working directory will be searched first, followed by the environment paths. - Specify the path on the RCP server or local RCP client. unit - (Optinal) Specifies which unit on the stacking system. If it is not specified, it refers to the master unit. - Enter the unit ID used here. This value must be between 1 and 12. src_file - (Optional) Specify the path name of the source file. - Specify the path name of the source file. Note that if no path name is specifies, only the current device configuration will be uploaded. include - (Optional) Includes lines that contain the specified filter string. exclude - (Optional) Excludes lines that contain the specified filter string. begin - (Optional) The first line that contains the specified filter string will be the first line of the output. - Specify a filter string enclosed by the quotation mark symbol. Thus, the filter string itself cannot contain the quotation mark character. The filter string is case sensitive. - Specify a filter string enclosed by the quotation mark symbol. - Specify a filter string enclosed by the quotation mark symbol. Restrictions Only Administrator and Operator-level users can issue this command. Example To upload the current configuration from the device to an RCP server: DGS-3620-28SC:admin#upload cfg_toRCP username rcp_user 10.48.74.121 dest_file /home/DGS-3620.cfg Command: upload cfg_toRCP username rcp_user 10.48.74.121 dest_file /home/DGS3620.cfg Connecting to server... Done. Upload configuration... Done. DGS-3620-28SC:admin# 103-7 upload firmware_toRCP Description This command is used to upload firmware from a device to a Remote Copy Protocol (RCP) server. Format upload firmware_toRCP [{username } {} dest_file | rcp: ] {unit } {src_file } Parameters username - (Optional) Specify the remote user name on the RCP server. - Specify the remote user name on the RCP server. - (Optional) Specify the IP address of the RCP server. dest_file - Specify the path name on the RCP server. Note: If a user specifies the relative file 1041