D-Link DGS-3620-52T CLI Guide - Page 129
show port_group
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters id - Specifies the port group ID. - Enter the port group ID used here. This value must be between 1 and 64. name - Specifies the port group name. - Enter the port group name here. This name can be up to 16 characters long. Restrictions Only Administrator and Operator-level users can issue this command. Example To delete the port group which ID is "2": DGS-3620-28SC:admin# delete port_group id 2 Command: delete port_group id 2 Success. DGS-3620-28SC:admin# 6-11 show port_group Description This command is used to display the port group information. Format show port_group {id | name } Parameters id - (Optional) Specifies the port group ID. - Enter the port group ID used here. This value must be between 1 and 64. name - (Optional) Specifies the port group name. - Enter the port group name here. This name can be up to 16 characters long. If not specified parameter, will show all the port group. Restrictions Only Administrator and Operator-level users can issue this command. Example To show all the port group information: 124