D-Link DGS-3620-52T CLI Guide - Page 40
show 802.1x
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config 802.1x auth_protocol [local | radius_eap] Parameters local - Specifiy the authentication protocol as local. radius_eap - Specify the authentication protocol as RADIUS EAP. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the 802.1X RADIUS EAP: DGS-3620-28SC:admin#config 802.1x auth_protocol radius_eap Command: config 802.1x auth_protocol radius_eap Success. DGS-3620-28SC:admin# 3-7 show 802.1x Description This command is used to display the 802.1X state or configurations. Format show 802.1x {[auth_state | auth_configuration] ports {}} Parameters auth_state - (Optional) Specify to display the 802.1X authentication state of some or all ports. auth_configuration - (Optional) Specify to display 802.1X configuration of some or all ports. ports - (Optional) Specify a range of ports to be displayed. - Specify a range of ports to be displayed. Restrictions None. Example To display 802.1X information: DGS-3620-28SC:admin#show 802.1x Command: show 802.1x 802.1X : Disabled 35