D-Link DGS-3620-52T CLI Guide - Page 153
enable bgp
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide [add | delete] | prefix_list [in | out] [add | delete] | capability_orf_prefix_list [receive | send | both | none]}(1) show bgp peer_group {} config bgp route_reflector cluster_id config bgp client_to_client_reflection [enable | disable] config bgp confederation identifier config bgp confederation peers [add | delete] clear bgp [all | ipaddr | as | peer_group | external] {soft {[in {prefix_filter} | out]}} clear bgp dampening {[ | ]} create bgp as_path access_list config bgp as_path access_list [add | delete] [deny | permit] delete bgp as_path access_list [list_name | all] show bgp as_path access_list {} create bgp community_list [standard | expanded] config bgp community_list [standard [add | delete] {internet | local_as | no_advertise | no_export | community_set }(1) [deny | permit] | expanded [add | delete] [deny | permit]] delete bgp community_list [list_name | all] show bgp community_list {} show bgp route {[regexp | inconsistent_as | cidr_only | filter_list | route_map | community {community_set | local_as | no_advertise | no_export | internet} {exact_match} | community_list {exact_match} | ipaddress | network {longer_prefixes} | prefix_list ]} show bgp neighbors { {[advertised_routes | received_routes | routes | received_prefix_filter | statistics]}} show bgp dampened_routes show bgp flap_statistics show bgp {summary} show bgp reflection show bgp confederation config bgp trap [peer_established | peer_idle | all] [enable | disable] show bgp trap_state config bgp scan_timer [ | default] config bgp aggregate_next_hop_check [enable | disable] config bgp fast_external_fallover [enable | disable] config bgp neighbor maximum_prefix [ | peer_group ] {} {warning_only} clear bgp flap_statistics {[ | ]} 12-1 enable bgp Description This command is used to enable the BGP protocol. By enabling the BGP protocol, all the previous configurations will be applied to the protocol kernel and start. By default, BGP is disabled. Format enable bgp Parameters None. 148