D-Link DGS-3620-52T CLI Guide - Page 938
config sflow analyzer_server
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 938 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Success. DGS-3620-28SC:admin# 87-9 config sflow analyzer_server Description This command is used to configure the sFlow analyzer server information. More than one collector with the same IP address can be specified if the UDP port numbers are unique. Format config sflow analyzer_server {timeout [ | infinite] | collectoraddress [ | ] | collectorport | maxdatagramsize }(1) Parameters - Enter the analyser server ID used here. This value must be between 1 and 4. The switch supports 4 different analyser servers at the same time. Each sampler or poller can select a server ID (1, 2, 3, or 4) to send the samples. timeout - (Optional) Specify the time (in seconds) remaining before the sample is released and stops sampling. When the analyzer_server times out, all of the flow_samplers and counter_pollers associated with this analyzer_server will be deleted. If it is specified as infinite, the server will never be timeout. - Specify the time out value, in seconds, between 1 and 2000000. infinite - Specify to never time out. collectoraddress - (Optional) Specify the IP address of the server. - Specify the IP address of the server. If set to 0, sFlow packets will not be sent to this server. - Specifies the IPv6 used. collectorport - (Optional) Specify the destination port for sending sflow datagrams. - Specify the destination port for sending sflow datagrams. The number is between 1 and 65535. maxdatagramsize - (Optional) Specify the maximum number of data bytes that can be packed in a single sample datagram. - Specify the maximum number of data bytes that can be packed in a single sample datagram. The values is between 300 and 1400. Restrictions Only Administrator and Operator-level users can issue this command. Example To configure the sFlow analyzer server information: DGS-3620-28SC:admin#config sflow analyzer_server 1 collectoraddress 10.90.90.9 Command: config sflow analyzer_server 1 collectoraddress 10.90.90.9 Success. DGS-3620-28SC:admin# 933