D-Link DGS-3620-52T CLI Guide - Page 1039
download
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1039 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 103-1 download Description This command is used to download a new firmware or a switch configuration file. Format download [firmware_fromTFTP [ | | ] src_file {[unit | all]} {dest_file } {boot_up} | cfg_fromTFTP [ | | ] src_file {[unit | all]} {[increment | dest_file ]}] Parameters firmware_fromTFTP - Download and install new firmware on the switch from a TFTP server. - Specify the IP address of the TFTP server. - Specify the IPv6 address of the TFTP server. - Specifies the domain name of the TFTP server. This name can be up to 255 characters long. src_file - Specify the path name and file name of the TFTP server. It can be a relative path name or an absolute path name. If path name is not specified, it refers to the TFTP server path. The maximum length is 64 characters. - Specify the path name and file name of the TFTP server. It can be a relative path name or an absolute path name. If path name is not specified, it refers to the TFTP server path. The maximum length is 64 characters. unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit. - Enter the unit ID used here. all - Specifies that all the units in the stacking system will be used. dest_file - (Optional) Specify an absolute path name on the device file system. If path name is not specified, it overwrites the bootup image on the Switch. - Specify an absolute path name on the device file system. boot_up - (Optional) Specify as boot up file. cfg_fromTFTP - Download and install new configuration file on the switch from a TFTP server. - Specify the IP address of the TFTP server. - Specify the IPv6 address of the TFTP server. - Specifies the domain name of the TFTP server. This name can be up to 255 characters long. src_file - Specify the path name and file name of the FTP server. It can be a relative path name or an absolute path name. If path name is not specified, it refers to the TFTP server path. The maximum length is 64 characters. - Specify the path name and file name of the FTP server. It can be a relative path name or an absolute path name. If path name is not specified, it refers to the TFTP server path. The maximum length is 64 characters. unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit. - Enter the unit ID used here. all - Specifies that all the units in the stacking system will be used. increment - If increment is specified, then the existing configuration will not be cleared before applying of the new configuration. If it is not specified, then the existing configuration will be cleared before applying of the new configuration. dest_file - (Optional) Specify an absolute path name on the device. If path name is not specified, it refers to the boot up configuration file. - Specify an absolute path name on the device. Restrictions Only Administrator-level users can issue this command. 1034