D-Link DGS-3620-52T CLI Guide - Page 803
show password_recovery
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 803 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format disable password_recovery Parameters None. Restrictions Only Administrator-level users can issue this command. Example To disable the password recovery mode: DGS-3620-28SC:admin# disable password_recovery Command: disable password_recovery Success. DGS-3620-28SC:admin# 72-3 show password_recovery Description The command is used to display the password recovery state. The displayed content includes both the running configuration and the NV-RAM configuration. When the password recovery state is enabled a user can reboot the switch and enter into the Password Recovery mode. Otherwise, if the Password Recovery state is disabled a user will not be able to enter into the special recovery mode. Note: Only the NV-RAM configuration will take effect when the switch restarts next time, the running configuration does not take effect until saved. That means the password recovery is determined by the state stored in the NV-RAM and take effect at the next time switch start up. The Running Configuration is the current configured state of the password recovery, it will lost without save, or become the NV-RAM configuration if save the configurations. Format show password_recovery Parameters None. Restrictions Only Administrator-level users can issue this command. 798