D-Link DGS-3620-52T CLI Guide - Page 1102
config wac method
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1102 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide before it can be re-authenticated.The default value is 60 seconds. - Specify a block time between 0 and 300 seconds. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the WAC port state: DGS-3620-28SC:admin#config wac ports 1-8 state enable Command: config wac ports 1-8 state enable Success. DGS-3620-28SC:admin# To configure the WAC port aging time: DGS-3620-28SC:admin#config wac ports 1-5 aging_time 200 Command: config wac ports 1-5 aging_time 200 Success. DGS-3620-28SC:admin# 108-5 config wac method Description This command is used to allow specification of the RADIUS protocol used by WAC to complete RADIUS authentication. WAC shares other RADIUS configuration with 802.1X. When using this command to set the RADIUS protocol, users must make sure the RADIUS server added by the config radius command supports the protocol. Format config wac method [local | radius] Parameters local - Specify the authentication will be done via the local database. radius - Specify the authentication will be done via the RADIUS server. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the WAC authentication method: 1097