D-Link DGS-3620-52T CLI Guide - Page 475
disable igmp_snooping, show igmp_snooping
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 475 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 39-6 disable igmp_snooping Description This command is used to disable IGMP snooping on the switch. IGMP snooping can be disabled only if IP multicast routing is not being used. Disabling IGMP snooping allows all IGMP and IP multicast traffic to flood within a given IP interface. Format disable igmp_snooping Parameters None. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To disable IGMP snooping: DGS-3620-28SC:admin#disable igmp_snooping Command: disable igmp_snooping Success. DGS-3620-28SC:admin# 39-7 show igmp_snooping Description This command is used to display the current IGMP snooping configuration on the switch. Format show igmp_snooping {[vlan | vlanid ]} Parameters vlan - (Optional) Specify the name of the VLAN to display the IGMP snooping configuration. - Specify the name of the VLAN. The maximum length is 32 characters. vlanid - (Optional) Specify the VLAN ID to display the IGMP snooping configuration. - Specify a range of VLAN IDs. Note: If no parameter is specified, the system will display all current IGMP snooping configuration. 470