D-Link DGS-3620-52T CLI Guide - Page 450

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Success. DGS-3620-28SC:admin# 35-4 show filter extensive_netbios Description This command is used to display the extensive NetBIOS filter state on the switch. Format show filter extensive_netbios Parameters None. Restrictions None. Example To display the extensive NetBIOS filter state on the switch: DGS-3620-28SC:admin#show filter extensive_netbios Command: show filter extensive_netbios Enabled Ports: 1-3 DGS-3620-28SC:admin# 35-5 config filter netbios Description This command is used to configure the Switch to deny NetBIOS packets on the network. Enabling of the filter NetBIOS state will create one access profile and three access rules per port automatically (UDP ports 137 and138 and TCP port 139). Filter commands in this file will share the same access profile. Format config filter netbios [ | all] state [enable | disable] Parameters - Specify the port or range of ports to configure. all - Specify to configure all ports. state - Specify the status of the filter to block NetBIOS packets. enable - Enable the filter to block NetBIOS packets. 445