D-Link DGS-3620-52T CLI Guide - Page 1054
ping6
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1054 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format ping [ | ] {times | timeout | source_ip } Parameters - Specify the IP address of the host. - Specifies the domain name of the host. This name can be up to 255 characters long. times - (Optional) Specify the number of individual ICMP echo messages to be sent. - Specify the number of individual ICMP echo messages to be sent. A value of 0 will send an infinite ICMP echo messages. The maximum value is 255. The default is 0 timeout - (Optional) Specify the time-out period while waiting for a response from the remote device. A value of 1 to 99 seconds can be specified. The default is 1 second. - Specify the time-out period while waiting for a response from the remote device. A value of 1 to 99 seconds can be specified. The default is 1 second. source_ip - Specifies the source IP address of the ping packets. If specified, the IP address will be used as the packets' source IP address that ping send to remote host. - Enter the source IP addres used here. Restrictions None. Example To send ICMP echo message to "10.51.17.1" for 4 times: DGS-3620-28SC:admin#ping 10.51.17.1 times 4 Command: ping 10.51.17.1 times 4 Reply from 10.51.17.1, time