D-Link DGS-3620-52T CLI Guide - Page 346
config dhcp_relay option_60 state, config dhcp_relay option_61 add
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 22-7 config dhcp_relay option_60 state Description This command is used to decide whether DHCP relay will process the DHCP Option 60 or not. When Option 60 is enabled, if the packet does not have Option 60, then the relay servers cannot be determined based on Option 60. The relay servers will be determined based on either Option 61 or per IPIF configured servers. Format config dhcp_relay option_60 state [enable | disable] Parameters enable - Specify to enable the DHCP relay function to use option 60 rules to relay DHCP packets. disable - Specify to disable the DHCP relay function from using option 60 rules to relay DHCP packets. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the DHCP Option 60 state: DGS-3620-28SC:admin#config dhcp_relay option_60 state enable Command: config dhcp_relay option_60 state enable Success. DGS-3620-28SC:admin# 22-8 config dhcp_relay option_61 add Description This command adds a rule to determine the relay server based on Option 61. The match rule can be based on either MAC address or a user-specified string. Only one relay server can be specified for a MAC address or a string. If relay servers are determined based on Option 60, and one relay server is determined based on Option 61, the final relay servers will be the union of these two sets of the servers. Format config dhcp_relay option_61 add [mac_address | string ] [relay | drop] Parameters mac_address - Specify the client's client-ID, which is the hardware address of the client. 341