D-Link DGS-3620-52T CLI Guide - Page 461
show igmp check_subscriber_source_network
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 37-5 show igmp check_subscriber_source_network Description This command is used to display the status of the IGMP report/leave message source IP check. Format show igmp check_subscriber_source_network {ipif } Parameters ipif - (Optional) Specifies the IP interface name used for this configuration. - Enter the IP interface name used for this configuration here. This name can be up to 12 characters long. If no parameter is specified, the system will display all interfaces. Restrictions None. Example To show the status of the check subscriber for the received IGMP report/leave messages on interface "n20": DGS-3620-28SC:admin# show igmp check_subscriber_source_network ipif n20 Command: show igmp check_subscriber_source_network ipif n20 Interface IP Address/Netmask n20 20.1.1.1/8 Check Subscriber Source Network Disabled Total Entries: 1 DGS-3620-28SC:admin# To show the status of the check subscriber for the received IGMP report/leave messages on all interfaces: DGS-3620-28SC:admin# show igmp check_subscriber_source_network Command: show igmp check_subscriber_source_network Interface IP Address/Netmask System 10.90.90.90/8 n1 1.1.1.1/8 n11 11.1.1.1/8 n20 20.1.1.1/8 n100 100.3.2.2/8 Check Subscriber Source Network Enabled Disabled Disabled Disabled Disabled Total Entries: 5 456