D-Link DGS-3620-52T CLI Guide - Page 663

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 59 Mirror Commands create mirror group_id config mirror port {[add | delete] source ports [rx | tx | both]} config mirror group_id {target_port | [add | delete] source ports [rx | tx | both] | state [enable | disable]}(1) delete mirror group_id enable mirror disable mirror show mirror {group_id } 59-1 create mirror group_id Description This command used to create a mirror group. If the mirror group has existed, do nothing and return success. Format create mirror group_id Parameters - Enter the mirror group ID used here. This value must be between 1 and 4. Restrictions Only Administrator and Operator-level users can issue this command. Example Create mirror group 3: DGS-3620-28SC:admin# create mirror group_id 3 Command: create mirror group_id 3 Success. DGS-3620-28SC:admin# 59-2 config mirror port Description This command is used to allow a range of ports to have all of their traffic also sent to a designated port − where a network sniffer or other device can monitor the network traffic. In addition, you can specify that only traffic received by, sent by or both is mirrored to the target port. 658