D-Link DGS-3620-52T CLI Guide - Page 187
create bgp as_path access_list, config bgp as_path access_list
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# clear bgp dampening 192.168.10.0/24 Command: clear bgp dampening 192.168.10.0/24 Success. DGS-3620-28SC:admin# 12-36 create bgp as_path access_list Description The command is used to create an Autonomous System path access list. You can apply an Autonomous System path access lists to both inbound and outbound routes exchanged by a BGP peer session. Format create bgp as_path access_list Parameters access_list - Specifies the AS path access list name. - Enter the AS path access list name here. This name can be up to 16 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example The following example creates an Autonomous System path access list: DGS-3620-28SC:admin# create bgp as_path access_list test Command: create bgp as_path access_list test Success. DGS-3620-28SC:admin# 12-37 config bgp as_path access_list Description This command is used to configure matching rules for an Autonomous System path access list using regular expressions. Format config bgp as_path access_list [add | delete] [deny | permit] 182