D-Link DGS-3620-52T CLI Guide - Page 1017
show super_vlan
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1017 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide ip_range - Specifies the IP range of the sub-VLAN that will be used. - Enter the starting IP address used here. to - Specifies that the next IP address will be the ending IP address. - Enter the ending IP address used here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure IP range of sub VLAN 1 to 10.1.1.1-10.1.1.3: DGS-3620-28SC:admin# config sub_vlan vlanid 1 add ip_range 10.1.1.1 to 10.1.1.3 Command: config sub_vlan vlanid 1 add ip_range 10.1.1.1 to 10.1.1.3 Success. DGS-3620-28SC:admin# 97-5 show super_vlan Description This command is used to display the super VLAN parameters. Format show super_vlan {[ | vlanid ]} Parameters - (Optional) Enter the super VLAN name used here. This name can be up to 32 characters long. vlanid - (Optional) Specifies the super VLAN ID used. - Enter the super VLAN ID used here. This value must be between 1 and 4094. Restrictions None. Example To show super VLAN: 1012