D-Link DGS-3620-52T CLI Guide - Page 715
Network, Management, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 715 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 66 Network Management Commands enable snmp disable snmp create trusted_host [ | | network | ipv6_prefix ] {snmp | telnet | ssh | http | https | ping} config trusted_host [ | | network | ipv6_prefix ] [add | delete] {snmp | telnet | ssh | http | https | ping | all} delete trusted_host [ipaddr | ipv6address | network | ipv6_prefix | all] show trusted_host config snmp system_name config snmp system_location config snmp system_contact enable snmp traps disable snmp traps enable snmp authenticate_traps disable snmp authenticate_traps enable snmp linkchange_traps disable snmp linkchange_traps show snmp traps {linkchange_traps {ports }} config snmp linkchange_traps ports [all | ] [enable | disable] config snmp coldstart_traps [enable | disable] config snmp warmstart_traps [enable | disable] config trap source_ipif [ { | } | none] show trap source_ipif config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]} show rmon 66-1 enable snmp Description This command is used to enable the SNMP function. When SNMP function is disabled, the network manager will not be able to access SNMP MIB objects. The device will not send traps or notification to network manager either. Format enable snmp Parameters None. 710