D-Link DGS-3620-52T CLI Guide - Page 903
config dscp trust, show dscp trust
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 903 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To display HOL prevention state on the switch: DGS-3620-28SC:admin#show hol_prevention Command: show hol_prevention Device HOL Prevention State: Enabled DGS-3620-28SC:admin# 81-16 config dscp trust Description This command is used to enable or disable the DSCP trust state on specified ports. Format config dscp trust [|all] state [enable | disable] Parameters - Specifies a range of ports to be displayed. all - Specifies that the command will apply to all ports on the switch. state - Enables/disables DSCP trust. By default, DSCP trust is disabled. Restrictions Only Administrator and Operator level users can issue this command. Example To enable DSCP trust on ports 1:1-1:8: DGS-3620-28SC:admin#config dscp trust port 1:1-1:8 state enable Command: config dscp trust port 1:1-1:8 state enable Success. DGS-3620-28SC:admin# 81-17 show dscp trust Description This command is used to display the DSCP trust state. Format show dscp trust {} 898