D-Link DGS-3620-52T CLI Guide - Page 81

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format show authen parameter Parameters None. Restrictions Only Administrator-level users can issue this command. Example To display the authentication parameters: DGS-3620-28SC:admin# show authen parameter Command: show authen parameter Response Timeout : 60 seconds User Attempts : 9 DGS-3620-28SC:admin# 4-25 enable admin Description This command is used to promote the "user" privilege level to "admin" level. When the user enters this command, the authentication method TACACS, XTACAS, TACACS+, user-defined server groups, local enable, or none will be used to authenticate the user. Because TACACS, XTACACS and RADIUS don't support the enable function by themselves, if a user wants to use either one of these three protocols to enable authentication, the user must create a special account on the server host first, which has a username enable and then configure its password as the enable password to support the "enable" function. This command cannot be used when authentication policy is disabled. Format enable admin Parameters None. Restrictions None. Example To enable administrator lever privilege: 76