D-Link DGS-3620-52T CLI Guide - Page 23

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 2-11 config temperature threshold Description This command is used to configure the warning temperature high threshold or low threshold. When temperature is above the high threshold or below the low threshold, SW will send alarm traps or keep the logs. Format config temperature threshold {high | low }(1) Parameters high - Specify the high threshold value. The high threshold must bigger than the low threshold. - Specify the high threshold value. This value must be between -500 and 500. low - Specify the low threshold value. - Specify the low threshold value. This value must be between -500 and 500. Restrictions Only Administrator and Operator-level users can issue this command. Example To configure a warming temperature threshold high of 80: DGS-3620-28SC:admin#config temperature threshold high 80 Command: config temperature threshold high 80 Success. DGS-3620-28SC:admin# 2-12 show serial_port Description This command is used to display the current console port setting. Format show serial_port Parameters None. 18