D-Link DGS-3620-52T CLI Guide - Page 1030
config sntp ipv6server, show sntp
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1030 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Success. DGS-3620-28SC:admin# 101-2 config sntp ipv6server Description This command is used to configure the SNTP IPv6 server information. Format config sntp ipv6server {primary | secondary }(1) Parameters primary - SNTP primary IPv6 server address. - Specify the IPv6 address of the Primary SNTP IPv6 server. secondary - SNTP secondary IPv6 server address. - Specify the IPv6 address of the Secondary SNTP IPv6 server. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure SNTP (primary IPv6 server: 1000::1, secondary IPv6 server: 1000::2): DES-3620-28SC:admin#config sntp ipv6server primary 1000::1 secondary 1000::2 Command: config sntp ipv6server primary 1000::1 secondary 1000::2 Success. DES-3620-28SC:admin# 101-3 show sntp Description This command is used to display the current SNTP time source and configuration. Format show sntp Parameters None. 1025