D-Link DGS-3620-52T CLI Guide - Page 773

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format show ospf {[ipif | all]} Parameters ipif - (Optional) Specifies the IP interface name. - Enter the IP interface name here. This name can be up to 12 characters long. all - (Optional) Specifies that all the IP interfaces will be displayed. If no parameter is specified, the system will display the current OSPF settings. Restrictions None. Example To display the current OSPF state: DGS-3620-28SC:admin# show ospf Command: show ospf OSPF Router ID : 10.90.90.90 (Auto selected) State : Enabled OSPF Interface Settings Interface IP Address Area ID State Link Metric Status System 10.90.90.90/8 0.0.0.0 Disabled Link Down 1 Total Entries : 1 OSPF Area Settings Area ID Type Stub Import Summary LSA Stub Default Cost Translate 0.0.0.0 Normal None None None 10.0.0.0 Normal None None None 10.0.0.1 NSSA Enabled 1 Disabled 10.0.0.2 Stub Enabled 1 None Total Entries : 4 Virtual Interface Configuration Transit Virtual Hello Dead Authentication Link Area ID Neighbor Router Interval Interval Status 10.0.0.0 10.0.0.1 10 60 None Down 768