D-Link DGS-3620-52T CLI Guide - Page 568
config jwac switch_http_port
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 568 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide need to be able to have access to accomplish authentication. Before the client passes authentication, it should be added to the Switch with its IP address. For example, the client may need to access update.microsoft.com or some sites of the Anti-Virus software companies to check whether the OS or Anti-Virus software of the client are the latest; and so IP addresses of update.microsoft.com and of Anti-Virus software companies need to be added in the Switch. Format config jwac update_server [add | delete] ipaddress {[tcp_port | udp_port ]} Parameters add - Specify to add a network address to which the traffic will not be blocked. Up to 100 network addresses can be added. delete - Specify to delete a network address to which the traffic will not be blocked. ipaddress - Specify the network address to add or delete. - Enter the network address here. tcp_port - (Optional) Specify a TCP port number between 1 and 65535. - Specify a TCP port value between 1 and 65535. udp_port - (Optional) Specify a UDP port number between 1 and 65535. - Specify a UDP port value between 1 and 65535. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure servers the PC may need to connect to in order to complete JWAC authentication: DGS-3620-28SC:admin#config jwac update_server add ipaddress 10.90.90.109/24 Command: config jwac update_server add ipaddress 10.90.90.109/24 Update Server 10.90.90.0/24 is added. Success. DGS-3620-28SC:admin# 47-16 config jwac switch_http_port Description This command is used to configure the TCP port which the JWAC switch listens to. This port number is used in the second stage of the authentication. PC users will connect to the page on the switch to input the user name and password. If not specified, the default port number is 80. If no protocol is specified, the protocol is HTTP. Format config jwac switch_http_port {[http | https]} 563